Hi everyone, I'm new here! I recently aquired a 351c ,the block sat in a garage for 13 years in the corner where the roof was leaking a bit.
i had the block tested along with the heads,block was good heads were scrap,steam test revealed cracks
in the spring seats.
I sent the block off to get completey machined from a to z they bored 40 over with torque plated and installed brand new SRP forged pistons, replaced the 4 bolts main bolts with ARP along with the rod bolts.
With 64cc heads they caculated the compression to be 10.8.1.
What i would like to know is opinions on the overall hp and torque.
-359 CI Cleveland 4 bolt block
-SRP Forged flat top pistons
-Crankshaft is forged
-Double Roller timing chain
-Comp Cams Solid mechanical camshaft 236/236---570/570
-SP4V AFD Aluminum Heads CNC 64CC
-Scorpion Roller Rockers 1.7
-Meilling stock replacement oil pump
-Clevite 77-H Bearings
-Moroso 6 Qt Oil Pan with windage tray
-Edlebrock Torker 2 4v intake
-1-3/4 long tube headers
-Quick Fuel 750 Carb
-MSD Distributor and Coil
-March 4-3/4 Crank Pulley
-Black Magic 3300 cfm Electric fan
-Aluminum High Flow water pump
Thanks i would love to hear what people think and there estimates.....APRIL 3RD IS THE DAY AT THE DYNO