Topic: A Update (Read 22702 times)

Russ · « **Reply #20 on:** April 04, 2006, 10:48:06 PM »

I think I might have the 2 valve but dont know how to tell. I am going to the carshow in ok city this weekend and I hope I might find something and then I'll be set.STANG OUT

Jerry Baker · « **Reply #21 on:** April 05, 2006, 09:18:48 AM »

looks good to me as well. Now for the intake I have no clue all I have ever seen is the 4v

Jerry Baker · « **Reply #22 on:** April 05, 2006, 11:33:10 AM »

Hey go to the picture section click on 71 - 73 and go to the 3rd page and look at the silver 71 doing the burn out. That can be your car. Rims and all. LOL

Russ · « **Reply #23 on:** April 05, 2006, 04:57:59 PM »

i AM GOING TO CHECK OUT THE PICS AND MAYBE EVEN GET THOSE RIMS HAVE TO LOOK,LOL. i AM STILL HAVIG PROBLEMS WITH THE CAR WANTING TO STALL AT 60 AND i THINK i MIGHT GET SOME NEW PLUGS AND THEN MAYBE JUST TAKE THE OLD INTAKE OFF AND SEE IF IT LOOKS WORTH A CRAP OR NOT.stang out.

Jerry Baker · « **Reply #24 on:** April 05, 2006, 07:34:08 PM »

I had to change carbs on mine, had rust in the tank and it was stoping the filters up might want to look at that stuff too.

Jerry Baker · « **Reply #25 on:** April 05, 2006, 07:35:34 PM »

oh the rims on that car are the Magnum 500s same as whats on mine if my memory is corect if not they are the 5 star cragers which I thought about getting for mine at one time.

Russ · « **Reply #26 on:** April 06, 2006, 10:26:20 PM »

Yeah I think that might be it I changed the wires plugs cap and rotor to include points. I have alot of ideas and I am leaving tommorrow morning for the car show and I hope I can find the right intake but who knows. I cannot wait to get to ky and get help with the body. I started sanding the top off of it but who knows I want to get as much as I can then get with marty or someone to get this dam body straight. I think it will be the next thing since the motor is running okay for the time being and now it is time to get on the worse part of the car the RUST. STANG OUT

Russ · « **Reply #27 on:** April 10, 2006, 12:12:10 PM »

Hey I found some moon cap rims but didn't get them thought they would be to old looking and they look better the old woodys and coupes not hte 1973 mach one. I know my car is about the ugliest car every made besides the 74-81 models which int my opion are all ugly but that is just me. I cannot believe that my car is so dam hard to find anything for but I guess that is just life the interior is complete and now the body is comming down to primer then it is on but still have those fenders I have to deal with which are going to be fun in it's self. STANG OUT

Russ · « **Reply #28 on:** April 10, 2006, 12:43:31 PM »

Got the top done and not going to put one back on there but shhh, no one can ever know. STAN OUT more to come

Thierry · « **Reply #29 on:** April 12, 2006, 11:21:24 AM »

Would you consider to exchange your ugly 1973 Mach 1 for a nice V6 1987 Firebird? :lol:
Seriously, I don't think the 71/73 Mach1 are ugly at all and they are my favorites after the 69/70 Mustangs. About the 1974/1978 ones, you are right. They didn't deserve the right to carry the Mustang emblems.

Russ · « **Reply #30 on:** April 12, 2006, 08:39:14 PM »

yeah bring it over and I will trade you, lol. I am getting all the paint off but it is taking longer than I thought but it will b e okay.STANG OUT

Russ · « **Reply #31 on:** April 17, 2006, 08:42:05 PM »

I did a couple more things to it as far as taking all the ugly paint off it and I am still thinking baout painting is silver but don't know if I want to go against the factory thing.

Russ · « **Reply #32 on:** April 17, 2006, 08:43:59 PM »

oh this is what 80 grit disk does when it hits ya

Russ · « **Reply #33 on:** April 17, 2006, 08:46:21 PM »

I took the back glass out nad I should have it back on thursday whihc is the last day I can mess with it so I hope I can get it done bye then STANG OUT

Jerry Baker · « **Reply #34 on:** April 17, 2006, 08:50:19 PM »

Well all I can say is its looking real good so far

Jerry Baker · « **Reply #35 on:** April 17, 2006, 08:53:20 PM »

Oh and that 80 grit love mark had to have stung. LOL

Russ · « **Reply #36 on:** April 29, 2006, 07:52:23 PM »

Okay I got to Fort Knox today about noon and I already miss my car I did get alot done in the little time that I had to mess with it but all in time I will have her back with me and I can get it all done but I think I am trying to get it done to fast but her are some pics I hope....

[ ERROR: SPECIFIED ATTACHMENT MISSING ]

Russ · « **Reply #37 on:** April 29, 2006, 08:00:00 PM »

that is after I took it out and that darn piece of the headliner came out so I had to pin it back up and then I cleaned it all up and pu it back in....

[ ERROR: SPECIFIED ATTACHMENT MISSING ]

Russ · « **Reply #38 on:** April 29, 2006, 08:04:27 PM »

I got alot of the sanding done but not all of it of course I had to get everything ready to move and momma stopped me but I guess that is how it workes

[ ERROR: SPECIFIED ATTACHMENT MISSING ]

Russ · « **Reply #39 on:** April 29, 2006, 08:10:00 PM »

that is all I have for now but more to come. STANG OUT

[ ERROR: SPECIFIED ATTACHMENT MISSING ]

V8 Ford Mustang forums

News:

Author Topic: A Update (Read 22702 times)