Forum > Classic Mustang Technical forum

rear end question

<< < (2/2)

Soaring:
Jack up one tire if you have an open diff, or both tires if you have a working posi or locking differential. Rotate the tire one full revolution for posis and lockers and 2 full revolutions for open diffs. Carefully count the number of full revolutions the driveshaft makes. This is your gear ratio. In other words, if the drive shaft turns 3 turns, you probably have a 3.73 gear ratio. Turning the tire for twice the number of full revolutions and dividing the drive shaft revolutions by two will give you a more accurate reading.

Tim175:
awesome ill give that a try tomorrow morning in the day light. thanks for all the help

Navigation

[0] Message Index

[*] Previous page

Go to full version