I need some help. I am restoring a 66' convertible and am in the rebuild stage. I recently installed the upper and lower control arms, spindle, strut rod and coil springs. I then went to install the shocks and shock brackets. However, I cannot get the three bolts and washers for the bracket to fit under the shock tower. The top part of the coil is pressed up against the tower, not allowing me to fit the bolts in their slots. Attached is pic of the area, in case my description is not very good. Anyway, how do I fit those bolts and washers in? Do I have to compress and remove the coils, or is there another way (which I really hope there is). Thanks.