Author Topic: c4-c6 swap (Read 3459 times)

mustangwannabe302 · « **on:** January 27, 2009, 01:06:07 AM »

i know i will have to shorten my driveshaft and crossmember in order for this swap my question is....what problems will i run in to? can i use the same fly wheel, what kind of stall should i get if i put 3.55 gears in it....the transmission came out of a 82-84 f-150 not sure which....Anyone done this b4?

Soaring · « **Reply #1 on:** January 27, 2009, 07:10:58 PM »

The C6 uses a different flexplate, and you are right about the crossover being different and you will have to cut off about 1" from the drive shaft.

mustangwannabe302 · « **Reply #2 on:** January 27, 2009, 07:17:23 PM »

Ok I can handle thati kno nowi would have been better off redoing the c4 after doin some research what stall would you recommend if I go with the 3.55 gears?