Forum > Classic Mustang Technical forum

Brake problem on 1965 Mustang

<< < (2/2)

The pulling is caused by the shoe on one side being tighter than the one on the other side.  Take the drums off and clean any moisture such as brake fluid off the drum and the shoe, then put it back on and adjust it so that you get some resistance from the drum, but not much.  Treat the other side the same way.  A good brake cleaner works wonders. 
As far as the booster, you probably have a vacuum leak as suggested. 

check for strut rod bushing loose on one side


[0] Message Index

[*] Previous page

Go to full version