Author Topic: belts? 65 289cui  (Read 4405 times)

65musti

  • Jr. Member
  • **
  • Posts: 13
  • Gender: Male
  • Mustang: 65 coupe
  • Location: poland
belts? 65 289cui
« on: March 13, 2010, 04:52:45 PM »
hi
does anybody know any european substitutes for:

c4te-8620-s alternator belt
c4ze-8620-b a/c belt
c5ae-8620-e power steering belt

the car is 65 289cui

i cant seem to find them anywhere.

please help!


Soaring

  • Global Moderator
  • *****
  • Posts: 4279
  • Gender: Male
  • 1965 Mustang coupe 289, '03 Mach1, 03 Lariat
  • Mustang: 1965 coupe 289, and 2003 Mach1
  • Daily driver: '03 Ford F-150 Lariat
  • Location: Wimberley, Texas
Re: belts? 65 289cui
« Reply #1 on: March 13, 2010, 06:07:13 PM »
There's a few ways you can go about this.  1. Take your belt (s) into an auto parts store and get one the same length.  That may be hard though, because you guys use milimeters instead if inches.  2.  Keep checking with EBay to see if someone is selling those belts.  3.  Check with Autozone to see if they will ship them to you.  http://www.autozone.com/autozone/
4.  Then, if all fails, I will send them to you.  Just PM me to let me know, and to give me your address. 

66GTKFB

  • Photo contest winner
  • *
  • Posts: 845
  • Mustang: 1965 GTFB, 1966 GTFB K, 1966 Hardtop
  • Daily driver: 1969 VW Baja
  • Location: Northern California
Re: belts? 65 289cui
« Reply #2 on: March 13, 2010, 06:22:59 PM »
hi
does anybody know any european substitutes for:

c4te-8620-s alternator belt
c4ze-8620-b a/c belt
c5ae-8620-e power steering belt

the car is 65 289cui
i cant seem to find them anywhere.
please help!
Greetings from Northern California and welcome to the forum.
I don't have any cross reference numbers to metric belts but I do have some addional Ford part numbers and dimensions.
- C4TE-8620-S alternator belt
- Replaced by C9PZ-8620-S
- Motorcraft no - JB-412
- Dimensions - 15/32 wide, 41 1/4 inch outside circumference
This belt is common on most Ford 289/302 alternator equipped engines thru 1969.

- C4ZE-8620-B a/c belt
- Replaced by C9PZ-8620-CS
- Motorcraft no - JC-544
- Dimensions - 1/2 inch wide, 54 1/2 inch outside circumference
This belt is common on most Ford 289 a/c cars thru 1967.

- C5AE-8620-E power steering belt
- Replaced by C9PZ-8620-AN
- Motorcraft no JB-505
- Dimensions - 15/32 inch wide, 50 5/8 inch outside circumference
This belt is common on most Ford 289 power steering cars with a/c thru 1967.

Where are you located in Poland? Most of my grandparents are from Gorlice.
Jim


65musti

  • Jr. Member
  • **
  • Posts: 13
  • Gender: Male
  • Mustang: 65 coupe
  • Location: poland
Re: belts? 65 289cui
« Reply #3 on: March 14, 2010, 05:41:37 AM »
There's a few ways you can go about this.  1. Take your belt (s) into an auto parts store and get one the same length.  That may be hard though, because you guys use milimeters instead if inches.  2.  Keep checking with EBay to see if someone is selling those belts.  3.  Check with Autozone to see if they will ship them to you.  http://www.autozone.com/autozone/
4.  Then, if all fails, I will send them to you.  Just PM me to let me know, and to give me your address. 


yeaaaah!  thanks for offer! i appriciate that, really, i will let u know if the ones i found won't be any good to me.

i found in some european(german) mustang shop the dimensions of those belts:

C4TE-8620-S alternator belt - lenght: 1030mm width: 11,17mm
C4ZE-8620-B a/c belt - lenght: 1370mm width: 13,46mm
C5AE-8620-E power steering belt - lenght: 1255mm width: 11,17mm

i hope they will be ok, i need to check it and then i'll let everybody know.



Greetings from Northern California and welcome to the forum.
I don't have any cross reference numbers to metric belts but I do have some addional Ford part numbers and dimensions.
- C4TE-8620-S alternator belt
- Replaced by C9PZ-8620-S
- Motorcraft no - JB-412
- Dimensions - 15/32 wide, 41 1/4 inch outside circumference
This belt is common on most Ford 289/302 alternator equipped engines thru 1969.

- C4ZE-8620-B a/c belt
- Replaced by C9PZ-8620-CS
- Motorcraft no - JC-544
- Dimensions - 1/2 inch wide, 54 1/2 inch outside circumference
This belt is common on most Ford 289 a/c cars thru 1967.

- C5AE-8620-E power steering belt
- Replaced by C9PZ-8620-AN
- Motorcraft no JB-505
- Dimensions - 15/32 inch wide, 50 5/8 inch outside circumference
This belt is common on most Ford 289 power steering cars with a/c thru 1967.

Where are you located in Poland? Most of my grandparents are from Gorlice.
Jim




that is very helpful as well, i will research those new numbers. i didnt expect such a warm welcome. thanks!

i'm from a town called Gliwice in she south. my grandmother is from Brzesko which is fairly close to Gorlice :))) oh and my stang is from Cali too. :)

cheersssss :)


Thierry

  • Administrator
  • *****
  • Posts: 1379
  • Gender: Male
    • Used cars
  • Mustang: Had a 69 Mustang coupe
  • Daily driver: Sunfire
  • Location: Saint John NB Canada
Re: belts? 65 289cui
« Reply #4 on: March 26, 2010, 12:33:26 PM »
Hi 65musti and welcome to the forum.
I asked the question in the French section and I hope I am not coming too late but someone in France gave me the dimensions of the belts he buys for his 67 289 Mustang.

Alternator belt: 11X1030
Power steering belt:  11X1205
http://www.mustangv8.com/fr/technique-mustangs-anciennes/ref-courroie-289-en-europe/

 

+-Navigation

Other languages
ESPANOL
FRANCAIS
Soaring
Soaring
In memory of our moderator Glen Wren AKA Soaring
1943-2011
Links



Dallas Mustang


Menu
LO-FI Version
Mustang classifieds
Muscle car classifieds
Classic Mustang FAQ


Mustangs for sale


Top Posters

Soaring
Posts: 4279
Thierry
Posts: 1379
66GTKFB
Posts: 845
rmodel65
Posts: 681
Jeff73Mach1
Posts: 471

Used Cars for sale - Ford Mustang classifieds - Forum Camaro FR

Powered by EzPortal