I noticed that the spacer has a flat side that was facing up towards the carb. Is this the correct position?
I got the package today. Thanks again!Setup questions...What is this port here at the front for? I don't have one there on my stock carb. Do I block it off or run a vacuum line from it to [attachimg=1]There are two ports here on the back. The angled one on the top looks like it should attach to the clean air line to the exhaust manifold for use with the heat line for the choke. Yes or No?The hole in the middle at the bottom is an open hole with no threads that leads into the carb. I blew into it to see if it was an open airway and it is. Do I just leave this alone and that's how it works or is something supposed to go there?[attachimg=2]Last question is in regard to the accelerator and throttle linkage. The accelerator pump assembly moves a fixed distance but the throttle will move farther to open the bottom choke more. When I hook up my throttle linkage, the only holes to connect to are on the levers to the assembly. Should I make a hole to attach my linkage to the other arm? The hole in the bottom is for a push throttle and mine is a pull.[attachimg=3]
Used Cars for sale - Ford Mustang classifieds - Forum Camaro FR