Topic: 67 Power steering

[srvblues]

Hello, I have a 67 289 Mustang with no power steering I would like to add it, are there any other options like a new gear box or do I need the whole slave cylinder set up? also I have long tube headers do I need a adaptor for the slave? Thanks Jeff

[Lanefair]

Check ABS Power Brake they have an integral power steering gear that bolts right in and eliminates several hoses that leak on the OEM PS.  I have it installed on my 1966 Mustang and 1967 Ranchero.  Ranchero has manual transmission with original type "Z" bar which required minor modifications.

[lavan]

Hi
   Thanks for your comments.

___________

computer services

[cliffm]

I'm aslos interested in doing this,  since I'm using the ford HP z-bar (boss 302 replacment) which has a generous arc area, I'm wondering if it could be shimmed or slightlt modified to fit?

my current config, 67 coupe, 347ci, tremec 3550, z-bar linkage, FR manaul box with 1" 1x8 sector, 68 tilts column, poly rag joint,

do I need to shorten the columsn? or just slide it up more?

[Lanefair]

I have installed the ABS integral PS gear in my 1966 Mustang that uses a 1968 steering column (collapsible with rag joint) and a slightly modified Z bar.  I have photos of what must be done and I have made up some spare parts that remount the Z bar.  It must be moved toward firewall to allow the gear box to occupy the space where the forward bolt was for the Z bar trunnion.  Provide me your email address and I will send a complete description with photos.  tbndb98@verizon.net