Topic: 66 exhaust upgrade

[giacomo]

I know this toppic has been discussed time and time again. But let me see if i can get you guy's most recent opinion. I have a 66 copue with a healthy stock 289 4bbl with 5 year old stock exhaust sys. I am looking for a little bit more thump than my current porr. Not looking for something to announce to the world that I've arrived, but something to give the car a little more presence. Not looking to replace stock manifolds. Thank you

[Soaring]

Here are some sound clips that may help you decide.  I have the Ravins on my 65 and love the sound.

Muffler Sound Clips:

65 Mojoe's 2 Chamber Flowmasters from outside the car:

65 mustang exhaust clips

(External Embedding Disabled)

65 Mojoe's 2 Chamber Flowmasters from inside the car.

project mojoe 6k rev sample

(External Embedding Disabled)

19Stang66's Deltaflow 2 Chamber 40's outside the car.

Flowmaster Exhaust on 1966 Mustang

(External Embedding Disabled)

19Stang66's Deltaflow 2 chamber 40's inisde the car on the road.

Flowmaster Exhaust on 1966 Mustang

(External Embedding Disabled)

Scouttrooper's Magnaflows.
Inside: http://www.martinpages.com/302-Exhaust-From-Inside-clip.wmv
Outside: http://www.martinpages.com/302-Exhaust-From-Outside-clip.wmv

Shelby GT500 with Magnaflows:
http://www.magnaflow.com/04sound/domestic/shelbyl.htm

Kalli's 1964 1/2 Flowmaster 40 series.

mustang 1964 flowmaster 40 exhaust

(External Embedding Disabled)

SuperDavids 40 series Flowmasters on the dyno.

67 mustang dyno

(External Embedding Disabled)

Ravin Muffler sound clip.

Exhaust clip

(External Embedding Disabled)

Cherry Bomb:
http://www.cherrybomb.com/

Valley Firearm's Thrust Glass Packs.

side exhaust

(External Embedding Disabled)

[giacomo]

Hey soring, Thanks. So o can do further research, where can I find this raven exhaust system and what am I looking for? I would like something that will require minimum replacement of parts other than the exhaust syst. Itself, be be able to take to a localuffler shop and replace

[Soaring]

I got my Ravins put on at a  Midas muffler shop.  I understand that they may have quit carrying the Ravins, but give your local Midas muffler shop a call and see what's going on with the Ravins. 
If Midas has indeed quit carrying them, you can get them at this website.  I have the Z-33's.  They don't have that loud crackling sound the flowmaster 40's have and they bolt right up to the existing exhaust manifold.  I went with duals with an "H" pipe.  I love the sound of mine, and I think you will too if you don't want the neighbors to wake up in the middle of the night when you come home from boot scootin'
http://www.communitymuffler.ca/RAVIN%20PERFORMANCE%20EXHAUST.htm

[naika]

great post, thanks!
I have to check what exactly is on mine, but I love the sound of most of those clips.

[giacomo]

ok, checked with midas and they no longer sale ravins. I have goggled ravins, and alot of references refered back to trucks and dakotas and so. Also flowmaster series 50's??? ive read they are quiter than 40's?. I have a relativlly new exhaust system, so is this something that could require just replacing the muffler it self???

[Soaring]

Then I was right.  Midas doesn't longer carry the Ravins.  But, you can order them online and have a muffler shop install them.  Yeah, the mufflers are all you need  to change out.  But why?