Topic: 65' Seat Belt Install

[joker]

How do you get too the nut for the seat belt mount.........or is there a threaded piece welded on the backside (underside) of the floor? 

[heavy]

It has been a few years since I removed/reinstalled mine, but as I recall they just threaded into the floorboard (I am sure there is a plate or something welded to the underside of the floorboards).  Also, I remember seeing the threads coming through the bottom side of the floorboards when i was just under there replacing the rear springs.

I do not think there are any bolts on the underside of the vehicle.

[Jeff1967]

I can tell you on my 67 the seat belts just bolt from the top into the floor boards, As for the bucket seats they unbolt from under the car....

Jeff

[Soaring]

Heavy is right.  If you also want to know where they are located under your carpet, here are pics of where they are on my '65.

[Jeff1967]

Glen,
Have the seats in Yeller been re-covered? I am getting ready to do mine, just curious if you can recommend a good company to buy them from?

Jeff

[mustangluver]

im using virginia classic mustang for the majority of my parts. reasonable prices

[Soaring]

Glen,
Have the seats in Yeller been re-covered? I am getting ready to do mine, just curious if you can recommend a good company to buy them from?

Jeff

There's a name brand out there that I can't remember offhand Jeff, but I got mine from Texas Mustang.  They have lasted me for 10 years now. 

[joker]

Thanx for the input.  Have my seat belts installed.......on too the next project