Author Topic: 351 C 2V pics? (Read 9893 times)

dubtom · « **on:** February 15, 2006, 12:42:35 PM »

Hi, I'm dressing up my 351 C 2v at the minute and am in the process of putting it back together. Not very mechanically minded, I took pics if the job put unfortunatly not very clear ones where the power steering pump is concerned, I cant figure out which way the bracket sits. Would anyone have a pic of the front of their 351 with the rad shroud/ fan etc removed. I know, a really dumba*s question, but I'm stuck here and don't want to chance damaging anything.

racedraper · « **Reply #1 on:** February 15, 2006, 04:36:33 PM »

hope this workes here is my cleveland. my air condition is in the way.

racedraper · « **Reply #2 on:** February 15, 2006, 04:42:19 PM »

I had to take a second look at your pic ,I thought it was my motor.. Ill take more pics of my motor if you want to show what I have done to mine so far..

racedraper · « **Reply #3 on:** February 15, 2006, 04:59:33 PM »

still a little dusty from sanding . I polished the air cleaner with a drimel but I need to use a bigger wheel,then I painted to inside and valve cover with ford blue engine paint. I guess It looks okay.

racedraper · « **Reply #4 on:** February 15, 2006, 05:02:08 PM »

im thinking when I rebuild the motor that Ill paint it to match the exterior paint. even the inner wells too.

Guest · « **Reply #5 on:** February 15, 2006, 05:52:18 PM »

Hey, thanks for responding, can't quite see the angle I need from your pics to mount the bracket correctly but I did find a pic browsing that may do the trick. Dressing has turned out to be more complicated that I had thought, if i had the right equipment I would have like to remove the engine to paint it properly, it really has been a chore trying to get into the crevices.If I manage to get it back together I'll post a pic of the finished bay.
Dubtom. :-D