Topic: 1970 302 in 79 mustang, need help with T5 tranny instllation

[Stevie Mac]

I am new to mustang and 302 all together.

Have a 1970 302 in 79 mustang and I am trying to put in a T5 tranny.  So far I have had some challenges. 

1. Is there a clutch set that is compatible with the 1970 flywheel and T5 tranny?
 The clutch set I just purchased is compatable for 1970 mustang at the flywheel but, the friction disc is not compatible with T5 with 26 spline.
 
2. what is part number for correct clutch pilot bearing?  The one that came with the kit is too big OD and ID.  the T5 has a smaller shaft.

These are the questions I have so far.

Thanks in advance.

[zebo87]

I'm not sure that setup will work. If that tranny is for a fox body I believe they were diff from the late 60s early 70s setup.

[Stevie Mac]

I found out the details.  302 block was from 1974 Maverick.  I was able to get the T5 to hook up in the 79. 

All worked out well. 

Thanks for your help.